Prism Photo sensor<KP series>
This is a kind of Photo Reflector. By prism beam axis is fixed and it makes it possible to sense stably. No wiring design on prism can help design.
| Pic | Model | Package | Detecting distance (mm) |
Electro-optical characteristics(Ta=25℃) | Remarks | RoHS | Dust proof Drip proof |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Light current(μA)※ | Response time(μ sec) | ||||||||||||
| min. | Rise time | Fall time | |||||||||||
 |
KP1650 | Connector | 20 | 300 | 22 | 22 |  |
 |
 |
||||
 |
 KP1660 |
Snap-in | 20 | 300 | 22 | 22 | |
|
|
||||
 |
KP3250 |
Connector | 20 | 300 | 22 | 22 | |
|
|
||||
 |
KP1430 | Lead | 30 | 500 | 24 | 27 | |
|
|
||||
|
※Measurement condition VCE=5V,IF=20mA for KP1430,KP1660,IF=10mA for KP3250 |
|||||||||||||
| Pic | Model | Package | Detecting distance (mm) |
Electro-optical characteristics(Ta=25℃) | Remarks | RoHS | Dust proof Drip proof |
|||
|---|---|---|---|---|---|---|---|---|---|---|
| Output※ | Operating mode | Ambient Illumination (Lux) |
||||||||
 |
KP1850 |
Connector | 200 | Pull -up resistor | LOW | 2000 | |
|
|
|
|
※Measurement condition IOL=16mA |
||||||||||
